Concept mock. Built by Prizmek for Arctic Air Tech Innovations. Contact details are real. Photography, statistics and reviews are placeholders.

Cold air. Engineered.

Installation, servicing and repair for homes and businesses across Nassau. Sized right, installed right, running right.

90°F Heat load
60° 90°
Outdoor 92°F
Setpoint 90°F
Heat removed 2°

Drag to set. Arrow keys work too.

Service area

Nassau and New Providence

We work on

Residential and commercial

Our approach

Honest diagnostics, not upsells

Built for

The Bahamian climate

What we do

Sized, serviced and repaired by the same team.

Three services that cover a system from the day it is specified to the day it stops working the way it should.

Newly fitted air conditioning condenser unit mounted on an exterior wall
01

Air Conditioning Installation

We design and install energy-efficient systems suited to the space, getting the sizing, the pipework and the commissioning right from day one. An undersized unit never catches up in August, and an oversized one short cycles and leaves the room humid.

How an install runs
Outdoor condenser unit fixed to the exterior wall of a home
02

Maintenance and Preventative Servicing

Service plans built to extend system life and cut breakdowns. You get honest diagnostics and efficient repairs rather than a quote for a new system every visit.

What a service covers
Electrical distribution panel being tested with a probe during fault diagnosis
03

Diagnostics and Repairs

Refrigerant leaks, electrical faults, compressor problems. We find the root cause so the same failure does not come back three weeks later.

Common faults we fix
Technician in protective gear taking a reading from wall-mounted equipment

A system nobody measured is a system nobody commissioned.

Plenty of units in Nassau were hung on a wall, switched on, and never checked again. They cool, more or less, until the day they do not. The difference between a unit that lasts and a unit that limps is whether anyone put gauges on it and read the numbers.

We check the split across the coil, the charge, and the airflow before we call a job finished. It is the least glamorous part of the work and the part that decides your power bill for the next eight years.

16-22°F
Target temperature split across the coil on a correctly charged system
400CFM
Airflow per ton a residential system should be commissioned to

How a job runs.

No mystery, no vanishing technician. Four steps from your first message to a system you can forget about.

01

Tell us what it is doing

Call or send the form. Brand, room, and what changed. Most problems narrow down fast once we know whether it stopped cooling suddenly or faded over a season.

02

Site assessment and sizing

We look at the space, the existing equipment and the electrical supply, then quote against what the room actually needs rather than what fits the budget on paper.

03

The work

Installation or repair, done to spec, with the site left clean. You get told what was wrong and what was replaced, in plain language.

04

Commissioning and handover

Gauges on, readings taken, controls walked through with you. If the numbers are not where they should be, the job is not finished.

Split systems/ Ductless mini-split/ Central air/ Refrigerant leak detection/ Electrical fault diagnosis/ Compressor service/ Coil cleaning/ Thermostat and controls/ Preventative service plans/ Energy-efficient system selection/
No reviews published yet

This is where customers speak.

We are not going to write it for them. Arctic Air Tech Innovations has no public reviews yet, so this section is empty on purpose. Inventing a quote from a Nassau homeowner is the fastest way to get caught by the one person who knows every customer by name.

The fix is not copywriting. It is a Google Business Profile, a short review request sent after each completed job, and this section switched on once there is something real to put in it.

Before you call.

The questions that come up most. If yours is not here, ask it in the form and you will get a straight answer.

Ask a question

Check that the breaker has not tripped, that the thermostat is set to cool and below room temperature, and that the filter is not blocked. A blocked filter is behind a surprising share of no-cooling calls, and clearing it costs nothing. If all three are fine, the fault is inside the system and worth a visit.

Usually it points to sizing or airflow rather than a broken part. An oversized unit cools the air fast, satisfies the thermostat, and shuts off before it has pulled enough moisture out. The room feels cold and clammy at the same time. That is a design problem, and replacing the unit with a bigger one makes it worse.

More often than in a temperate climate. Salt air corrodes coils and fins, systems here run most of the year rather than three months of it, and dust loads filters faster. We will recommend an interval based on where the equipment sits and how hard it works. Coastal installations exposed to spray need attention sooner than a sheltered inland unit.

Yes. Arctic Air Tech Innovations serves both residential and commercial properties across Nassau. Tell us the building type and the equipment on site when you get in touch and we will confirm scope before quoting.

It depends on the age, the failed component and what the unit costs you to run. A capacitor on a six-year-old system is an easy call. A failed compressor on a system already past its expected life usually is not, once you weigh the repair against the efficiency of a current model. We will give you both numbers and let you decide.

Call 1 (242) 805-8571 and the team will confirm the next available slot. Response time depends on the season and how the day is booked, so an honest answer over the phone beats a promise on a web page.

Request a quote

Tell us what the system is doing.

The more detail in the message, the more useful the first reply. Brand, age, room, and what changed all help.

Call1 (242) 805-8571 Emailinfo@arcticairtechinnovations.com
Service areaNassau and New Providence, The Bahamas
Please enter your first name.
Please enter your last name.
Please enter a valid email address.
Optional, but it is the fastest way to reach you.
Please choose a service.

This form is not connected in the mock. Wiring it up is a build step, not a design step.

Request captured. On the live site this lands in the Arctic Air inbox and sends you a confirmation.